MOKA SFX P-14 18 LEDs non-waterproof par light
This par light is Combining energy-saving and environment-protective features of LED Lamps, using high efficiency constant current & new heat dissipation technology, 256 Grey Scale adjusted and created revise technology to make the dimmer to be more smoothly.
MOKA SFX P-14 Slim body indoor led par light, It is applying for the garden, big show, stage, theater, outdoor building, indoor using and other places.
- High-powered 18pcs LED 18W
- Hex color RGBWA/UV 6in1
- 18pcs 6in1 RGBWAUV LED lamps
- Compact size
|Light source||18*10W 4 in 1 / 18*18W 6 in 1|
|Light source life||100,000 hours|
|Control mode||DMX512, master-slave, voice control, self Walking|
Here's all the little things you care about.
The par light P-14 18 LEDs non-waterproof is an 8*18W Par Light RGBWA+UV 6in1, Super Bright Flat LED Par DMX 512 Stage Effect Light for DJ Nightclub Decoration.
LED 18*10W RGBW 4in1 Par Light is a new design par can. It is using 10W High Power Patch lamp beads to reach a super bright effect. Color can be snow white.
Besides, it is brighter than other par stage par lights with the same power. It with strong exhaust cooling system. Instant heat dissipation, making the lights durable and ensuring damage during operation. With the use of advanced switching power supply to adapt to a wide voltage range, ultra-low voltage start, The voltage will fluctuate during normal operation. Which is suitable for stage performances, parties, night club, weddings, etc.
DJs, Bands, Bars, Pubs, Clubs, Roller skating rinks, KTV, Family party, Birthday, celebration, Wedding, Festival, Mall, Store, Shop and other appointed place.
MOKA SFX P-14 18 LEDs non-waterproof par light is High brightness Patch Lamp Beads(Brighter than same power par lights), so if you looking for high brightness par light, this model could be one of your picks.
Also inside with a unique Cooling Fan System(Quick cooling function), you don’t have to worry about the heating dissipation, which could help you get a longer lifespan with this light.
And Super Thick Thermal Chip, which could Keep low & stable temperature of the light.
MOKA SFX P-14 18 LEDs non-waterproof par light built with Control panel 4 digital LCD display show, with significant information for the power and signal;
High efficiency constant current drive, 4096 level gray adjustment, no flash, mixed variety colors can reach to as many as 16 million;
5 levels color temperature adjustment function built-in, with a variety of strobe and auto-run effect, master/slave control mode acceptable。
- Safety Notes
- shipping details
- INTERNATIONAL BUYERS
- Please handle the MOKA SFX PAR LIGHT by a professional person only.
- Use the device in the correct direction, vertical standing / vertical hanging (based on the different machines).
- Smoking near the machine is prohibited.
- Do not place the machine in a rainy and humid environment.
We support all the available way of Internation Shipping, as listed below:
1) By Express: FEDEX / DHL / UPS
2) By Plane + Delivery to Door
3) By Train + Delivery to Door
4) By Sea + Delivery to Door
Some of the above shipping methods we can do DDP, so you can avoid the handling of tax and save cost.
As the Unit charge for the different countries is different, pls contact us to check the exact freight offer.
1) For entire product is a 1-year Warranty.
2) After 1-year, the component cost will be charged when replacement needed.
Lots of SFX items made by China manufacturer are lack of the critical point: “Details”. But you will find an elegance arrangement product line in us, as we believe that only details will speak out for our difference to the others.
MOKA SFX P-14 18*10W 4IN1 led par lights
▾ Why is the MOKA SFX MK-P14 led Par 64 Lights Perfect for your event?
▾ MOKA SFX MK-P14 par can lights Specifications and Working Mechanisms
▾ Precautions to Take When Installing the MOKA SFX P-14 par can lights.
▾ Advantages of the MOKA SFX MK-P14 par can lights.
Why is the MOKA SFX P-14 led Par Perfect for your event?
Stage lighting can turn your event from a boring little soirée into a full-blown performance due to the effects that you can currently play with. Fiddling with the effects can bring you cool lighting effects, not only in fancy performances like theatres but also in discos, billboards, and sports arenas.
MOKA SFX led par P-14 is perfect for your stage because, normally, electric lights produce a lot of heat. This, especially for long events, will cause attendees to be uncomfortable and sweaty, and the actors’ makeup gets ruined easily because of sweat. LED par lights, though, are bright and don’t produce heat as the traditional and usual lights do.
These lights can be the key you need for a dramatic enhancing of your team’s performance and the experience of those in attendance of these performances.
MOKA SFX MK-P14 par can lights Specifications and Working Mechanisms
PAR is an acronym for Parabolic Aluminum reflector, representing lights that have a cylindrical housing which is a combination of aluminum and steel. The lights contain reflectors that help focus the lights that the LED par lights emit to one spot. The lights are held together in their housing by a socket, which also supplies the lights with electricity to power them.
MOKA SFX par can lights P-14 need a power input range of 100-240V. This is essential because any variance in power input affects the lights’ quality. Sometimes, a variance in the power supply will cause the main circuit board or lamp head to burn.
Weight and Display Technology
The par can lights P-14 weigh approximately 6.2kgs and are classified as 18*10W, RGBW. RGBW is an acronym for Red, Green, Blue, and white that is used in LED that utilize the 4in1 feature, which offers more lighting options than its predecessors. The pure white element of these LED par lights comes in warm white, which carries 2800K, natural white with 4000k, and cool white at 6000k, which you can choose depending on the event you are preparing for. The element can be of great help for your performance, allowing brighter color definition and to smoothly transit between colors.
You can control your par can lights in several ways, including through RDM, DMX512, master/slave, voice control, and safe walking.
Remote Device Management (RDM)
Before RDM, you’d take a long time building patch files for a console to maintain your lights. RDM Enhances DMX to allow for half-duplex communication between a lighting controller and its associated devices.
This technology allows you to install, maintain and manage your lights without interrupting ongoing performances. The controller can send commands and questions to devices to its associated devices and get an answer. These commands and messages cover lighting systems management tasks such as setting DMX addresses, monitoring sensors, lighting status, usage, and error identification.
Benefits of using RDM
- RDM negates the use of DIP switches and allows you to set the base address of your lights.
- Automatic discovery and patching of connected devices.
- It’s easy to find the correct lamp library.
- The bidirectional communication between the lights and the controller makes it easy to discover and fix errors.
DMX stands for Digital Multiplex and is the standard protocol for digital communication. DMX’s most essential feature is its controller, consisting of a desk, console, or playback that initiates communication, cables to carry the communication to the lights or dimmers, and the light fixtures or dimmer packs for brightness maintenance. This protocol gives users the ultimate control over their lighting requirements and configuration to fit their event.
DMX512 controls up to 512 channels/lighting functions per circuit. To control your par can lights while using DMX:
- You first need to connect to the controller’s output and the first light’s input
- Plugin the next DMX cable and power source to the first light in the run
DMX is a legacy protocol that RDM surpassed. It is unidirectional and doesn’t get communication back from the lighting after sending commands to it. DMX can either be wired or wireless.
How to Set the DMX Address?
Every feature involved in par lighting will need a starting address. When a signal is sent, the features will receive the channel control signals of this address from the DMX controller. Each fixture will need to be controlled separately using a unique DMX address.
When fixtures use the same DMX address, they will get the same command and have the same output. The P-14 uses Channel, which essentially means that the DMX addresses have to be 11 channels apart to function.
Benefits of Using DMX Systems
DMX lights are compatible with intelligent lights that can change color, motion, and patterns, allowing you to change the lighting based on the mood you are trying to convey during a performance.
This control system uses low voltage and is easy to use on mobile devices such as laptops. The protocol is compatible with most lighting systems which is an energy-efficient mechanism.
With the DMX protocol, you can easily program your lighting aspects, including light and color intensity, the lights’ angle, and their patterns.
Master/slave control is new in LED lighting and usually occurs when one device takes unilateral control over others. The control uses a combination of 5.8G microwave sensors with 2.4GRTT and sensor control. This is done in conjunction with the DMX protocol. When you need to control color mix and the brightness of your lights, the controller becomes the master and transmits the commands to the slave devices, including dimmers, color changers, moving heads, scanners, LED color changers, and stroboscopes.
Voice control is the easiest form of control because what is needed is the initial programming of voice commands into your control device. When you need to change the effects, just voice the commands, and the effects change. This way, you can control your par can lights intensity, color, and brightness.
These lights have a 10000-hour shelf-life. The long shelf-life ensures that you get a Return on Investment on your lighting equipment. In addition to these, these lights are portable, which makes them easy to rent out for event companies.
According to Lighting Equipment Sales, the light beam angle is an angular expression of how light is emitted from a light source. Lamps have beam angles that range from 4 degrees to 60 degrees. The MOKA SFX par can lights MK-P14, has a customizable beam angle of 25/40.
Precautions to Take When Installing the MOKA SFX P-14 par can lights.
- Ensure that you place the circuit boards individually; stacking them may cause the boards to be destroyed or deformed, which is not a fixable situation. Handle them carefully so that the pads don’t fall off.
- Place the PCB board on the side during installation. Always ensure that the pad is connected and hasn’t fallen off.
- Use the user manual to ensure that you have installed all terminals according to the directions prepared for you. Always check the direction and polarity of the terminals.
- Please use anti-static gloves when installing the led par lights to ensure that you don’t transfer residual electrical power to the circuit boards, thus damaging them.
- When testing the lights, ensure that you don’t look at them directly as LED par lights are very bright. Watching bright lights directly may cause damage to your eyesight.
Installing Your led Par Lights
Installing your led par lights depends on several conditions, for example, the stage design intended, the height of the ceiling, and the weight of the light’s fixtures. There are different types of lighting depending on the effect you want to give, including single-point, two-point, three-point, and four-point lighting. Single point lighting is meant to keep the audience’s focus on an individual performer on a stage.
There are two lights for two-point lighting: one in front and the other at the back of your performer to bring about a 3-D effect on the performer.
Three-point lighting removes shadows from the performer and is perfect for key-note speakers. And four-point lighting is used for video productions to eliminate all shadows.
How to Clean and Maintain Your par can lights?
To get the optimal light output and performance from your device, MOKA SFX recommends that you clean your led par lights. Remember to plug off all the lights and associated features from any power supply unit.
- Locate a micro-fiber cloth and wet it; I recommend using a glass cleaner. Wipe down the lenses and the base.
- In case you bought your led par lights to install them long-term, especially in clubs, then I would recommend removing the fixtures periodically to clean and maintain them. When the dust settles on your lights for a long time, they will start failing.
Advantages of the MOKA SFX P-14 par can lights.
- The MOKA SFX gives you various methods of controlling your lights, making it easy for you to choose what is available or affordable to you. The lightweight of the led par lights makes them portable.
- The incredible shelf-life of the lights ensures that you don’t have to replace them.
- The energy efficiency of the lights because of the low input voltage the lights require.
- LED par lights don’t produce heat, which makes your event space comfortable.
- Customizable special effects for your par light, which ensures each of your events is unique and fun.
- With the adjustable head, you can set the par can lights at the optimal angle for your performers and audience to hurt anyone’s eyes.
MOKA SFX provides a one-year warranty for the dance floor. This means that if you encounter glitches or damages on any of the panels or special effects within the time, we will provide the repair services free of charge.
Unfortunately, we don’t cover any damages resulting from customer errors or any other man-made burnout defects. Please watch out for all the precautions set out in our manual to prevent any economic loss.
MOKA SFX Manufacturing Capabilities
Our factory is located in Guangdong province, which has extensive manufacturing capacity for all your event machine needs.
We also own two global warehouses, one in Germany and another in America. This means we have products already stocked in these warehouses and can cater to your event needs fast and efficiently.
We are open to meeting your specific requirements as well. If you need the panels made in a certain way or if you need an unusually big number of panels, we are available for discussions.
Products You Can Use With the MOKA SFX P-14
Our par can light will go well with any of our fog machines. The fog machines produce a low-lying cloud-like effect which creates a mystical kind of effect to your event. Add a little bit of the special effects on your lights, and you can have a wonderful concert experience that people will talk about for ages to come. Fog machines use dry ice pellets because they sublime to form the natural fog for your events.
Are you shopping for par can lights and need an estimate of the lights and fixtures’ cost? MOKA SFX is available and ready to estimate for you. We have a friendly on-call customer support team who will take care of your query promptly, we will not charge you for the estimates, and this is our small way of appreciating you for trusting us with your special effects needs. We will get back to you with reasonable and timely quotations.
Lights are waves that are received and inferred by our eyes. Led par lights are a great way to allow performers to set the mood for their events. They can help tell a story or draw out emotion from spectators. When used on a stage, Led par lights can help center your audience to what is happening on-stage at the current moment. The use of led par lights to create new angles, colors, effects, and intensity is an excellent portrayal of how to use led par lights to enhance performance.
Throughout this article, we have learned about led par lights and their uses, precautions to take when installing the lights, the control mechanisms involved when utilizing led par lights, and their benefits to your event. So, what are you waiting for? Just place an order, and enhance the liveliness of your event!