MK-HLS40 40w Laser Light
There are lots laser projectors on the market now,the configuration of your laser projector,and the spare parts used inside,which have a direct impact on the laser shows.
- You can create millions of different color combinations.
- Ideal for long-distance beam shows and basic graphics projections.
- A low cost yet powerful solution for power demanding laser applications.
|Voltage:||100V – 240 V / AC, 50/60 Hz|
G: 520nm 10000mw
|Sopt Divergence Angle:||ca.8mm/1.3mrad|
|Control Mode:||ILDA, DMX512, Sound, Aotomatic, Master-slave|
Here's all the little things you care about.
Laser Show Projector
MK-HLS40 laser show projector as high power system,which is designed for large concert tours and roadshows,stage festival,live stage performances,advertisements and promotions,also could plays at exhibitions,projection on water curtains and fountains,and many other applications.
When you are looking at different laser systems,there has few factors you need to know about,which is also advantages of MK-HLS40 laser show projector.
1-Laser projectors always specified as “watts(W)” or “milli-watts(mw)”,1W=1000mw,take note of this,it is important when you reading your laser projector.
The real laser power should be at the output window instead of produced inside the laser projector.
And we can guarantee you that we always make laser projector with full power,you can purchase a laser power meter,measure the output power at window when you buy MK-HLS40 laser show projector.
2-When you working with RGB laser projectors,put it on laser show,it is important to have a system with an even balance of red,green and blue laser sources inside,this would be a critical element that allows you to create wider variety colors with laser projector.
A good ratio of red,green,and blue should be 20-30% red,30-40% green,and 40-50% blue colors. Green is the most visible color for laser projectors,expensive for sure,on the opposite,blue is the cheapest laser source.
So when you looking for laser projectors,some laser manufactures advertise high power lasers,but use a lot of blue. This is not good,when you use this kind laser projector on the laser show,you have unbalanced colors.
With MK-HLS40 laser show projector,total 40000mw. 8000mw/638nm（red）,12000mw/520nm (green),20000mw/450nm(blue),so when you use MK-HLS40 laser show projector on the laser show,I’m sure you gotta give audience a unforgettable memories.
3-We installed Analog and TTL modulation both inside MK-HLS40 laser show projector,when you use under TTL modulation,you are limited to only seven colors total,also can not fade in and fade out with different colors.
While with MK-HLS40 laser show projector,you could also use analog with good linear modulation,you can create millions of different color combinations,also fade in and fade out during these colors when making different laser effects on laser shows.
When you use MK-HLS40 laser show projector on large outdoor laser shows, you could also consider other moka stage equipment,like flame machine,sparkular and CO2 confetti blaster,ect. All these stage effects will totally throw satisfied to the crowed.
With all moka laser projectors,we offer 1 year warranty,included MK-HLS40 laser show projector. MOKASFX always give reliable after service,you could always count on us.
Also got full certifications,CE and ROHS. Please keep the ball rolling if you need more details,send your inquiry immediately.
- Please handle the MOKA SFX LASER LIGHT by a professional person only.
- Use the device in the correct direction, vertical standing / vertical hanging (based on the different machines).
- Smoking near the machine is prohibited.
- Do not place the machine in a rainy and humid environment.
We support all the available way of Internation Shipping, as listed below:
1) By Express: FEDEX / DHL / UPS
2) By Plane + Delivery to Door
3) By Train + Delivery to Door
4) By Sea + Delivery to Door
Some of the above shipping methods we can do DDP, so you can avoid the handling of tax and save cost.
As the Unit charge for the different countries is different, pls contact us to check the exact freight offer.
1) For entire product is a 1-year Warranty.
2) After 1-year, the component cost will be charged when replacement needed.
Lots of SFX items made by China manufacturer are lack of the critical point: “Details”. But you will find an elegance arrangement product line in us, as we believe that only details will speak out for our difference to the others.
WHAT ARE THE THINGS YOU SHOULD KNOW ABOUT THE MOKA MK-HLS40 LASER SHOW PROJECTOR?
▾ What are the best-suited events to use Laser show projector
▾ What Are the Highlights of Our Mk-HLs40 Laser Show Projector?
▾ What are the general safety measures to adhere to while using Outdoor laser light show equipment?
▾ How do you control the MK-HLS40 laser show projector?
▾ Is laser show projector safe for human beings?
▾ Why you should buy your laser show projector from us
Have you ever wonder what produces those magnificent lightings you see in those big clubs and live events? Yeah, they indeed were a laser show projector in the background, which makes those colors. A laser show projector allows you to project millions and a different combination of colors in a controlled and specified area. This laser show projector is responsible for laser beam projections or graphics as seen at festivals, nightclubs, and it can also be used for laser projection mapping and more. Using the right laser show projector can help create good vibes and ecstasy.
There is a lot of laser projector in the market, which increases counterfeiting products. Many manufacturers could sell low-quality projectors, or they might not even adhere to safety rules and regulations when producing their products. We can guarantee you that MK-HLS40 was manufactured with full power, which you will be allowed to measure before you buy our product.
When buying a laser show projector, many considerations can be made, affecting the laser shows. These considerations are the advantages MOKA MK-HLS40 has over other products. This could include its color combination, durability. You don’t want to spend all your budget on purchasing new ones every time, you need to consider the coverage area of the projector, its power consumption, and its size- the MK-HLS40 is designed with light materials that allow it to be surprisingly small in size thereby making it easy for the user to carry it about as he/she wishes.
MK-HLS40 laser show projector is a high power system essential in creating a colorful and fun atmosphere in live events. It contains various colors with beautiful effects and patterns. It has over 100 default theme which you can easily choose from especially if you are a novice and doesn’t know how to customize your patterns using software programs. It is designed for huge concerts, stage festivals, advertisement, promotion; it could be projected on water curtains and fountains. Due to some unique features of the MK-HLS40 laser show projector, it can project images and data on various projecting surfaces.
What are the best-suited events to use Laser show projector
The outdoor laser light show equipment, MK-HLS40 Laser show projector, can be used in many places for entertainment and awareness. It creates positive energy and gives life to an event. Come to think of it, who doesn’t like good lighting? During a festival or concert, use artificial smoke or fog with the laser light and see how it works magic on everyone in the event. The color display and the beautiful fogs and smoke will evoke an exhilarating response from the audience and light up the event’s atmosphere. Colors have always been known to have psychological effects on human beings and, subsequently, improve mood.
Now, if you were wondering where you could use laser lighting, here are few places where laser light can light up everyone’s mood.
- Theatres- laser projectors are essential in cinemas because they produce brighter 3D images with broader colors. There will never be a dull moment in cinemas due to poor image qualities.
- Sporting events- laser light can create beautiful patterns, shapes, or letters to thrill the audience. Imagine what it will be like to attend the national bawl games, watch your favorite team win against the opponent, and just when you are celebrating, you see this colorful light pattern on display. That will surely be a day you would never forget.
- Outdoor events- during outdoor parties and concerts, an outdoor laser light show equipment can be employed. Laser lighting display can change everybody’s mood in the event, making them happy throughout the event and feeling like they are one with the show.
- When in church, your pastor could share a movie with you through outdoor laser light show equipment that can be used for outdoor crusades. Although most traditional churches aren’t designed to accommodate a projecting surface, most modern churches have them.
Apart from its extensive use, the MK-HLS40 can be easily operated, and it is at an affordable price. It is yet giving out the best lighting for necessary graphics projections.
What Are the Highlights of Our Mk-HLs40 Laser Show Projector?
Before you buy a laser show projector, an important aspect to consider is the weight. You wouldn’t want to buy a piece of equipment that could make you make you feel like you just came back from the gym anytime you transport it to a location or set it up for use. Not only is the MK-HLS40 laser show projector small in size, but it also has a net worth of 47kg, which is less bulky compared to other products. Its casing was manufactured with specially selected metal which is denser than iron.
When considering setting up an outdoor event with a large population and large space. The best outdoor laser light show equipment to use is the MK-HLS40 laser show projector because it offers a wide range of graphic projection that makes your stage stand out; it is also ideal for long-distance beam show. You could consider some of our other equipment like a flame machine, sparkler, CO2 confetti blaster, MOKA SFX fog machine series, e.t.c. when planning an outdoor laser show.
Comparing the power consumption of a laser show projector is essential before buying one. The projector’s power determines the range and the brightness of the light produced by the laser show projector. The MK-HLS40 laser show projector has a full capacity which can be measured at the window when you buy our outdoor laser light show equipment.
BEAUTIFUL COLOR DISPLAY
When working with RGB laser projectors, it is essential to have a projector with an even balance color of red, green, and blue laser sources. This would allow you to create a more comprehensive variety of colors with the laser show projector.
We installed Analog and TTL modulation into the MK-HLS40 laser show projector. When your project under the TTL modulation, you can only use seven colors with no special effects, but with the MK-HLS40 Laser show projector, you could also use the analog modulation that allows you to create millions of different color combinations. It even fades in and out during these color changes making other laser effects on the laser show.
Some laser manufacturers produce laser projectors that contain a lot of blue. This is not good because it gives an unbalance color during shows. With an MK-HLS40 laser show projector, you have a total of 638nm/9000mw Red, 520nm/10000mw Green, 450nm/12000mw Blue color combination will make the light show spectacular.
In an outdoor laser show equipment, a good ratio of red, green, and blue should be around 20 – 30% red, 30 – 40% green, and 40 – 50% blue. Green tends to be the most visible color for laser projectors. Therefore it is quite expensive, while blue is the cheapest laser source.
Whatever you need, our laser projector will deliver the correct laser lighting display you need to create a lively atmosphere and make the event a great one.
The durability of our outdoor laser light show equipment is top-notch. The MK-HLS40 laser show projector was built using an aluminum case, which prevents the machine from rust. The device casing was also made using hard oxidation on the aluminum surface to prevent corrosion. The laser show projector is designed to resist scratches so as not to get defaced easily. Having our outdoor laser show equipment means you won’t be purchasing anyone again for a long time.
Our laser show projector is designed with a quiet fan to cool the engine from getting overheated; this leads to an increase in battery life. All MOKA laser show projector has an inbuilt fan that can last for a long time as long as the machine is not physically damaged.
What are the general safety measures to adhere to while using Outdoor laser light show equipment?
Although the product used to produce our outdoor laser light show equipment makes it safe to use, because we always consider the safety of our user and audience, it is essential to follow all the safety guidelines provided before hosting a laser lighting display party.
These safety precautions would guide you in the usage of your laser show projector
- When setting up the venue, always consider the distance between the laser lighting display and the audience. There should be a distance of 10 -12 feet between the laser show equipment and the audience.
- During outdoor events like concerts, sports games, festivals, e.t.c. It is essential to reduce the light intensity of the laser lighting display so that it doesn’t distract any aircraft flying at that time.
- The laser lighting display should not be allowed to fall directly on a person’s body because the radiation could be harmful to the human body. It is advisable to use beams with lower power if it is to be pointed toward the audience.
- Always check with the local authority of the location you are using to know what is required at the venue. If you are having an outdoor event, you would be expected to obtain a “variance” from the appropriate organization. The laser show should be submitted to the Federal Aviation Administration (FAA) before the show for review.
How do you control the MK-HLS40 laser show projector?
The indoor and outdoor laser light show equipment (MK-HLS40 laser show machine) is designed with multiple control systems to make it easy to control the laser lighting display. The laser show projector comes with default patterns you can choose from, and you can also design your way using the software.
The machine uses the following control options:
- ILDA – the ILDA uses computer software to control the laser lighting display from the laser show projector. It is suitable for large events and concerts because it gives room for more creativity and control. With the ILDA control, you can create texts or shapes with laser light.
- DMX-512 – the digital cinema 512 allows you to control multiple channels through one data cable. It will enable the laser show projector to be controlled manually or through lighting automation. It can be found in clubhouses and discotheques.
- Sound- sounds from the surrounding can also be harnessed to control the laser lighting display. DJs always use it in clubhouses where it looks as if the light is dancing to the music played by them.
- Automatic control- if you are a novice and you don’t know how to use a software program to customize your pattern, you could use the automated control and let the projector run on its own.
- Master–slave: before the master-slave operation can be active, it is essential that the connection unit can act as transmitter and receiver of DMX512 signals. The master unit will serve as a DMX controller, and it then transmits the control signal to the slave unit(s).
This would only work in an automatic mode and sound mode. This makes it a suitable outdoor laser light show equipment.
What are the specifications of the laser show projector?
|Voltage||100V – 240V / AC, 50/60Hz|
|Power||R:688nm/9000mw, G: 520nm/10000mw, B:450nm/12000mw|
|Spot Divergence Angle||Ca.8mm/1.3mrad|
|Control Mode||ILDA, DMX512, sound, automatic, master-slave|
Is laser show projector safe for human beings?
The MK-HLS40 laser show projector and other outdoor laser show equipment have gone through series of tests, and it is internationally certified as safe to use. The laser show projector’s design follows the International Laser Display Association (ILDAs) code, thereby complying with the permitted exposure limit.
In laser shows, people tend to fear that the laser lighting display can cause harm to their skin when they are exposed to it, this might be true with other products, but this is not the case with the MK-HLS40 laser show projector machine.
Why you should buy your laser show projector from us
All MOKA projectors come with a 1-year warranty offer, including an MK-HLS40 laser show projector. If there is any fault or damage within this period, the company will provide you with all the necessary professional support that will be needed. We also have full certifications CE and ROHS.
For more information and inquiries on the laser show projector or other products, consult the MOKA information team or visit the company’s website. Visit us for bulk purchases. We are always happy to hear from you.