MK-F13 Dry Ice Fog Machine

MOKA SFX MK-F13 dry ice fog machine is a device to produce low-lying clouds, widely uses for atmosphere effects industry, wedding, parties, Halloween, formals, product presentations, some dance events.

You can find the low fog effect very popular for the first dance of a wedding, for making dance on a cloud amazing and treasure photo when dancing on clouds.

The dry ice fog machine is a simple and easy operation, the connection with supplied power for the 3500W device is 220V, and for 2000W device in 110V.

The MK-F13 MOKA dry ice fog machine can contain 10L (2.5 gallons) at the top waterline and 7 lbs (3kg) solid dry ice for one circle working.

  • simple and easy operation
  • adjustable control handle to medium position and a low position
  • Install temperature sensor
  • no slippery dangerous

Specifications

Coverage:50-100 m2
Set-Up:
Voltage:AC110V -220V, 60Hz /50Hz
Max Power:220V 3500W / 110V 2000W
Control:Manual
DMX Channel:
Heat-up time:3500W (15-19 mins) / 2000W (20-25 mins)
N.W.:8.85KG
G.W.:11.2KG
Product Size:49x45x46.5cm
Packing Size (Carton):49x45x46.5cm
Component:Power Cord
Packing Option:Normal Carton / Flycase (Optional with higher cost)
  • Send Your Inquiry

Here's all the little things you care about.

Take a look at the product decsription below. If you still have questions, feel free to visit our FAQ page, or reach out to us.

Description

Before your right time to control fog flow, you just pour water into the basket of the MK-F13 dry ice machine, waiting for water heat up time of about 15~18 minutes after power on.

When the water reaches 85℃, the temperature sensor automatically shuts off the heater (same security shut off when low-water), the indicator light turns on from red to green, then it’s time to pour dry ice pellets into boiled water.

When dry ice pellets are dipped into hot water, it sublimates into carbon dioxide gas (not the same physical reaction as ordinary ice melt), then there has thick and white fog that goes out from the output exit of the machine to the direction where you desire fog to move to.

The dry ice machine MK-F13 is designed with an adjustable control handle to a medium position and a low position to make abundant output lasting 4min to 5min.

Typically it’s enough time to run the cloud effect for the first dance.

For easy transport dry ice fog machine, you have an optional movable cart to load it and move the machine easily without heavy burden, you can buy this trolley from us MOKA SFX also.

Features

Because solid carbon dioxide is pure and dry, there’s no odor fog to be produced by dry ice machine MK-F13 unlike other for the machine.

And dry ice fog is totally lying on the ground without rising before fog dissipates to the air, it brings you a perfect low fog effect underneath your knees so you don’t worry about fire alarms or smoke detectors will be triggered by dry ice fog.

What’s more, it does not make your floor wet so you can rest assured of no slippery danger when people dancing on a cloud.

To enrich special effects to your events, the MK-F13 MOKA dry ice fog machine can be used along with MOKA MK-E11 cold sparkler machine, they are the perfect combo to create a spark on cloud magical effect.

We also have a bigger output MK-F12 dry ice machine for large scale venues.

Let’s contact us to help with your inquiry and order.

  • Please handle the MOKA SFX Fog Machine by a professional person only.
  • Use the device in the correct direction, vertical standing / vertical hanging (based on the different machines).
  • Smoking near the machine is prohibited.
  • Do not place the machine in a rainy and humid environment.

We support all the available way of Internation Shipping, as listed below:

1) By Express: FEDEX / DHL / UPS
2) By Plane + Delivery to Door
3) By Train + Delivery to Door
4) By Sea + Delivery to Door

Some of the above shipping methods we can do DDP, so you can avoid the handling of tax and save cost.

As the Unit charge for the different countries is different, pls contact us to check the exact freight offer.

 

1) For entire product is a 1-year Warranty.
2) After 1-year, the component cost will be charged when replacement needed.

Helped 1000+ Customers Since 2013

Lots of SFX items made by China manufacturer are lack of the critical point: “Details”. But you will find an elegance arrangement product line in us, as we believe that only details will speak out for our difference to the others.

Complete Guide for MOKA SFX MK-F13 Dry Ice Fog Machine

    ▾ What the MK-F13 Dry Ice Fog Machine is Capable Of?
    ▾ Why Choose MK-F13 Dry Ice Fog Machine?
    ▾ Order Now
    ▾ Conclusion ​

What the MK-F13 Dry Ice Fog Machine is Capable Of?

Unlike the other fog, mist, or smoke machine that initially floats in the direction, it is pointed but eventually rises and dissipates, a dry ice fog machine, like that of our MK-F13, hugs the floor longer and creates many other incredible effects. It is this capability of the MK-F13 dry ice fog machine that is the perfect choice for wedding dances, performers on a stage, and even ballet dancers. The fog’s snaking movement on the floor and its twirling and twisting fog create a cloud-like feel and make it look as if people are walking on the clouds as it touches their feet.

MOKA SFX dry ice fog machines have made the events interesting for the people as there is something about fog that arouses their interest of people. Whether it is for stage plays, theatrical performances, or concerts, a fog-producing machine is a must-have piece of special effect equipment to create the drama or suspense desired. A fog machine will also come in very handy during special occasions like birthdays, and victory celebrations. It can provide a perfect romantic ambiance when a couple makes their first dance together as husband and wife or a father’s emotional dance with a daughter-debutante. MK-F13 dry ice fog machine will also give a feeling of walking on the clouds as the bride walks the aisle during a marriage ceremony to the loving arms of the groom. It will be a sight to behold and an image worthy of being shared on your social media accounts.

MOKA SFX dry ice fog machine is one of the most-sought special effects equipment by event organizers and those in the entertainment industry. It is important to be able to make the right choice from the many fog machines available in the market today.

Speaking of fog machines, there are other special effects equipment that on the surface may look as if they produce the same effect. In reality, they are not, and they do have differences to fit a variety of the desired effect. We are talking here of dry-ice, heavy-fog, smoke machines,s and even of haze and haze machines.

For now, we will focus on introducing to you our MK-F13 3500W Dry Ice Fog Machine that will blow your mind. By the end of this article, you will be convinced of the necessity to have one, or even more of this dry ice fog machine. Along the way, we shall compare and contrast this with other machines previously mentioned.

 

Why Choose MK-F13 Dry Ice Fog Machine?

With MK-F13, also called a ground fog machine because of its capability of hugging and being suspended near the ground, you will be the proud owner of a powerful, durable, and elegantly designed machine that has an added aura of strength because of its shiny black coating. It has the looks and appearance of a tank with weapons of mass destruction ready to go to battle; only this time, it gives life to an event and not death. Indeed, a must-have piece of special effect equipment that will be a source of envy from others.

Below are just a few of the many reasons why choosing the MK-F13 dry ice fog machine is a wise move.

 

Easy to Operate Equipment

For the MK-F13 dry ice fog machine, one does not have to be an expert to operate it properly. It comes with an easy-to-understand manual, easy to operate, and easy to handle special effect equipment. You will be in for a surprise once you attempt actually to use and operate it with its manual control. For its power, the 3500W device can be connected with the 220V outlet while the 2000W device is compatible with 110V.

To produce the foggy effect desired, one has to pour water into the tank opening the latch handle. It comes with light indicators when the dry ice fog machine is turned with the label heating. This gives you an idea that the machine is functioning and in a matter of between 15-18 minutes, a green light indicator will flash as a signal that the machine is ready to receive the dry ice pellets into the boiling water. It will then result in the fog to start coming out from the MK-F13. 

It is when the dry ice pellets are dipped into the hot water that it transforms into carbon dioxide gas. The result would be the creation of thick and white fog coming out from its big rounded nozzle to the direction desired.

Just some words of caution from us. The dry ice is pegged at a very low temperature, so it is a must to avoid touching for having contact with the dry ice, even for a brief moment, which will cause skin burns. The dry ice used as an indispensable element in producing the low-lying fog must be treated with extreme care and caution to avoid any unnecessary injury.

And speaking of dry ice, you should be aware that it is hard to come by and so must prepare to stock it when using the machine. This is specifically true when the MK-F13 dry ice fog machine is to be used in a venue that is at a distance from major cities and towns. If that is the case, ensure that you have an adequate supply to last for the event and its storage.

As for the safety feature of the MK-F13 dry ice machine wedding, a temperature sensor embedded in the machine will automatically shut off the heater if the water temperature reaches 85 degrees Celsius. The same safety net happens when the water level in the tank is already low. This will prevent the machine from being damaged.

 

Short Heat-up Time

You need not wait for long before the MK-F13 starts blowing out the heavy and thick white fog to fill the ground of your venue. From the time liquid has been poured into the tank and powered on, it will take only between 15-18 minutes heating time maximum, and then the machine will commence making an incredible spectacle on the venue to the amazement of people in attendance. 

 

Sufficient Continuous Output

And once the MK-F13 dry ice machine wedding starts its output to a maximum coverage of 100m², it will continue to emit a fabulous white fog for at least 3 minutes. With this time, it will be more than enough to fill the wedding place without overcrowding it with thick smoke. While a sufficient amount of fog can create a desirable effect, too much of that can be irritating as people and other effects may be overshadowed or hidden.

 

Large Tank Capacity

The MK-F13 dry ice fog machine has a liquid tank that is capable of water consumption of up to 10 Liters or 2.5 gallons. Once the water reaches the boiling temperature required, it can also accommodate up to 7 lbs. or 3 kgs of solid dry ice. A large tank is important so that it can adjust a sufficient amount of liquid and dry ice to perform what it was designed for effectively. The MK-F13 dry ice fog machine is that kind of machine.

 

Convenient for Transport

The size of the MK-F13 dry ice fog machine may be a bit bulky, but considering the enormous function it is capable of, the same is very justified. But this MOKA SFX ground fog machine does have handles to make carrying and transferring from one place to another convenient. 

On the one hand, the MK-F13 has an accessory to make its mobility easier. A movable cart specially designed for the MK-F13 dry ice fog machine is available as an option for the buyer. With this portable cart which is available for a small price, the ground fog machine can be loaded on it and be moved with this wheeled trolley with relative ease.   

Adjustable Output Control

A lever installed on the Mk-F13 dry ice fog machine gives the operator option to control the direction and volume of the output. With the easy-to-use feature, the control handle can position the output either on a high or low position while pouring out the thick white smoke to up to 3 minutes.

 

Safe to Use

Aside from the automatic shutdown feature of the heater installed on the MOKA SFX dry ice fog machine, it comes with other safety nets.

A common occurrence with other fog machines is that it turns the floor wet. And it is a fact that a wet floor can make it slippery which may result in injury to those in attendance. Furthermore, people stepping and walking on the floor, make the venue untidy and an irritant to the people. With the MK-F13 dry ice fog machine, we assure you of a non-slippery floor for those people who sure would want to have that experience of walking or dancing on a cloud. 

While another machine produces smoke, haze, or mist that is suspended in the air and eventually rises up until it dissipates, the fog coming out from the MOKA SFX MK-F13 stay afloat on the ground without rising and eventually dissipates into thin air. And because the fog is maintained low and just underneath your knees by this dry ice fog machine, the fear of fire alarms and smoke detectors coming alive is avoided, unlike others who always have that possibility to contend with. 

A standard of any product’s reliability is a certification to that effect from any government entity or prestigious institution that issues product certification after passing a standard process. 

 

Officially Certified as a Safe Product

Aside from the quality control that is usually part of the process of any company, we at MOKA SFX go beyond that. We only not make sure that we produce quality special effects equipment that is apt to our standard, more so, to the standard set by the countries and their domestic market where we are going to distribute and sell our products.

And just like any machine coming out from the MOKA SFX factory, the MK-F13 dry ice fog machine has all the CE/ROSH and FCC certifications. 

These certifications found on each of the MOKA SFX machines, the MK-F13 ground fog machine included, is a guarantee in terms of reliability, durability, craftsmanship, and even of safety and health standards.

The CE certification issued by the European Union is only issued to products sold in any of its member countries after the said product has been stringently evaluated and passed it. In particular, the MK-F13 dry ice fog machine has been tested and found to be complying as well as in conformity with environmental protection standards, health, and safety. 

The same is valid with the RoHS certification also issued by the European Union. The MK-F13 dry ice fog machine having the RoHS certification is vouched as having not exceeded the allowed volume of restricted materials used on the electrical equipment product line of lead, mercury, chromium, and the like hazardous materials.

On the one hand, the FCC issued by the United States of America (USA) on the MK-F13 ground fog machine is a guarantee on our electrical equipment that any electromagnetic interference it has is under the standard approved by the Federal Communication Commission (FCC).

It is common knowledge that both the USA and EU have a high standard in terms of the quality of products allowed to be sold in their respective domestic markets. With the approved CE/Rosh and FCC certification issued on the MK-F13 dry ice fog machine, a sure guarantee in terms of commercial product value and quality.

 

Satisfactory Company Warranties

While our company guarantees that any product coming out from its production line will be to the buyer’s satisfaction and expectation, we also prepare for any eventuality. It is for that reason that all our products, including the MK-F13 dry ice fog machine, have a warranty of 12 months from purchase. Meaning, should there be any technical glitches the MK-F13 ground fog machine may encounter, our technical team will attend to them with feverish urgency and free of charge. Likewise, if a part is broken and needs to be replaced, it will also be replaced with an original replacement at no expense to the buyer.

And because our product the MK-F13 dry ice fog machine is sold and delivered globally, customer concerns are also our top priority to attend to. That is why we have a customer service online that is ready to receive your issues on our product 24/7. Contact our technical team and describe the problem you have with our MK-F13 ground fog machine, and we will get back to you within a turnaround time of 12 hours. Better also, if aside from the description of the problem, you provide our technical team with a video of the problem so that our technical team can identify the issue and offer you the solution.

Not only that, but we also acknowledge that you want to have the MK-F13 dry ice fog machine your personal touch. With that, we can have your company logo placed on the machine for you to be proud of. You simply email our technical team the design of your company logo, and we will be more than happy to oblige to your request. When you receive your purchased MOKA SFX MK-F13 dry ice fog machine, it will really feel like it was costumed-made for you and you alone. That should be a proud moment for you.

 

Easy to Order and Fast Delivery

To order the MK-F13 dry ice fog machine, simply contact our company, and our sales team will assist you with a free hassle order and payment procedure. Once the preliminaries are done, the special effects equipment shall be delivered to your very own doorsteps in just a matter of between 3-7 days, depending on your location. If your receiving address is near our factory or that of our warehouses in the USA and Europe, the MK-F13 dry ice fog machine will be yours in as early as three (3) days. Anywhere else in the world, it will reach, at the latest, after seven (7) days. That is not too long a wait. In any case, once you receive your MOKA SFX’s MK-F13 dry ice fog machine, it will all be worth the wait and money spent.

 

Also, if fortunate enough to be near any of our showrooms, not only will you personally inspect our MK-F13 dry ice fog machine, but you will also have the chance to try our wide array of special effects equipment. You may end up with not only ordering our MK-F13 dry ice fog machine but also our other equally fantastic and quality special effects equipment.

Order Now

Have the MK-F13 dry ice fog machine a valuable addition to your inventory of special effects equipment. This is one kind of MOKA SFX product that you will always be thankful for having. For queries or to ask for an estimate of the cost of a project, you are planning will make use of the MK-F13 dry ice fog machine, contact us. The requested quote will be provided to you at no time at all. Not only that, it will be a complimentary service of our company to you. It is our way of extending to you our appreciation for taking a keen interest in our product.

 

Conclusion

The increase in high-level events and wedding celebrations has increased the demand for management and celebration levels as well. People look for haze or dry ice machine wedding oriented, which cannot only make their event special but will make eye-catching visual effects.

We at MOKA SFX never leave our customers and have prepared products like MK-F13 which can make your events special and worth remembering. Visit our website to get access to our many other exceptional and worth-trying products. So, what are you waiting for, enquire now. Contact us. Purchase our MK-F13 dry ice fog machine, and make your wedding special!

You May Also Like

double fog F14
  • DMX512 & Remote Control
  • No Need Pre Warming
  • 3 Fans
F15
  • Small Size Bigger Output
  • Low Fluid Detector
  • Long Output
low fog machine
  • New Design
  • Create Low Fog
  • Use Waterbase Fog Liquid
fog machinef16
  • Temperature & Low Fluid Detector
  • 1500W Big Power
  • 8Mins Warm-up Time
Scroll to Top