H-E01A Dmx Flame Machine
Specification
- Voltage: AC 110/230V 60/50Hz
- Power: 80W
- Flames high: 3M (10ft)
- Control mode: DMX 512
- Package dimensions: 25x25x34cm
- Net Weight: 4.1Kg
- Gross weight: 5Kg
- DMX Channel: 2
H-E01A Dmx Flame Machine
Advantage
- the ignition success rate of up to 98%,
- 3Pin and 5Pin DMX connectors
- addition of a safe channel
- cut off the power when the machine falls down
The H-E01A DMX Flame Machine is the latest design in 2019, designed specifically for the stage, combining customer feedback and market trends.
H-E01A DMX Flame Machine pursues perfection from the overall design; the external nails are embedded, the nails will not protrude, and the appearance will not be seen, when you touch the machine, it is smooth and comfortable, and will not be scratched.
The inside of the hand-held mouth is more convenient to carry and transport without increasing the weight.
The H-E01A DMX flame machine is more humane stage equipment.
- Customer Feedback
- Certificaton
- Contact Us
Related H-E01A Dmx Flame Machine
H-E01A Dmx Flame Machine: The Definitive Guide
The H-E01A DMX Flame Machine’s accessories have also been improved upgrade to use the most suitable 2mm nozzle diameter for optimum fire-breathing results.
At the same time, we have switched to higher quality ignition needles and high-voltage igniters with an ignition success rate of up to 98%, to avoid the cold field caused by ignition failure during use.
H-E01A DMX Flame Machine has 3Pin and 5Pin DMX connectors.
When you are in use, you have more choices for DMX signal lines.
H-E01A DMX flame machine uses a POWER-ON power plug.
When you are active, multiple connections can reduce the socket, just the first machine connected to the power supply, and it is more convenient for your activity to use the machine.
The H-E01A DMX flame machine uses the LCD display address code, which makes it more intuitive and convenient when you set the address code.
The H-E01A DMX Flame Machine adds safety features when designing the program.
If the H-E01A DMX Flame Machine is knocked down during the activity, the machine will immediately cut off the power of the machine and stop the shot flame to ensure your life is safe.
And avoid property damage. Another feature is the addition of a safe channel.
Channel 1 is a safe channel. When you set the channel 1 value between 102 and 153, the H-E01A DMX Flame Machine enters safe mode and channel 2 does not work at this time.
When the channel 1 value is not between 102 and 153, the safe channel is closed and the channel 2 can work normally.
The work indicator will flash in sequence to remind you that the working mode has been activated.
You don’t have to worry about accidentally hitting the console to trigger the H-E01A DMX Flame Machine to run and hurt others.
The H-E01A DMX Flame Machine enters the household LPG gas, which is very convenient to buy.
You don’t have to worry about buying consumables.
Our free high-pressure hose is made of resin material. Don’t worry about leaking when you connect LPG gas.
The high-pressure hose connection to the machine end uses a quick interface, can be directly connected to the LPG gas and machine, no additional screwing required, improve your work efficiency, to ensure that you get the best effect for every event.
Come and contact MOKA SALES TEAM to take the latest model of the H-E01A DMX Flame Machine in 2019, and become the most effective special effects props and helpers on your stage!