MOKA SFX EPL BEAM 250
EPL BEAM 250 is a new generation of beam moving head light launched by MOKA SFX; equipped with a 250W , it can work continuously for 10,000 hours.
The beam has an angle of 3°, is full and hollow, and has a strong penetrating power;
15-meter illuminance exceeds 59760 LUX, which can produce a beam effect that is unmatched by traditional discharge bulbs.
EPL BEAM 250 enables a new world of expression in touring, events, TV, theatre and installed lighting markets.
- 3-layer plum blossom mirror effect
- Strong beam effects
|Voltage Input (Vac) :||AC 100 – 240V 50 -60Hz|
|Beam angle:||3 °|
|Light Output :||15m (65 feet),59760 LUX|
|Control Mode:||RDM ,DMX512, Master/Slave, voice control, self Walking|
|DMX Channel:||16 CH Prism Wheel 16-facet prism|
|Color wheel:||13 colors + white light|
16 prism + 7 color effect
3-layer plum blossom mirror effect
Horizontal/Vertical: Horizontal scanning angle is 540°, vertical scanning angle is 270°, 16-bit precision scanning
|Signal interface:||3-pin &5-pin plug input/output|
|Power plug:||PowerCon ,10AFuse|
|Display:||LCD display+5 buttons|
Here's all the little things you care about.
EPL BEAM 250 LED fixtures brings Moka’s no-compromise quality and performance to the broad mid-market. The quality of their effects, their construction, and their high light output derive from the high-end products Moka SFX specializes in.
EPL BEAM 250 has an even more compact body – less than 500mm – and is able to emit a super-concentrated solid beam with a beam angle as small as 3° and a surprising light output.
The wealth and quality of its colors and aerial effects, its electronic focus and its 140 mm diameter front lens make the EPL BEAM 250 the ideal beam moving light in any application area.
It boasts cutting-edge electronic and software technology, with all the features that enable optimal fixture management and maintenance over time. With a price-point, physical size and power consumption that disguise its strength and creative potential.
EPL BEAM 250 is an extremely cost-effective moving head beam light created by Moka. It adopts 250W high-efficiency LED module light source and has a design life of more than 15,000 hours;
This lamp is light, fine, high luminous efficiency, super beam feeling, good heat dissipation design supplemented by intelligent fan control technology, quieter than gas discharge light source lamps, low noise, as low as 40 decibels.
The 16 prism creates a gorgeous effect, with 7 colors that can be changed, making people immersed in the stage world.
Please feel free to contact us if you want more details!
- Please handle the MOKA SFX MOVING HEAD LIGHT by a professional person only.
- Use the device in the correct direction, vertical standing / vertical hanging (based on the different machines).
- Do not place the machine in a rainy and humid environment.
We support all the available way of Internation Shipping, as listed below:
1) By Express: FEDEX / DHL / UPS
2) By Plane + Delivery to Door
3) By Train + Delivery to Door
4) By Sea + Delivery to Door
Some of the above shipping methods we can do DDP, so you can avoid the handling of tax and save cost.
As the Unit charge for the different countries is different, pls contact us to check the exact freight offer.
1) For entire product is a 1-year Warranty.
2) After 1-year, the component cost will be charged when replacement needed.
Lots of SFX items made by China manufacturer are lack of the critical point: “Details”. But you will find an elegance arrangement product line in us, as we believe that only details will speak out for our difference to the others.
MOKA SFX EPL Beam 250 dmx moving lights
▾ How EPL Beam 250 dmx moving lights will Save Your Function
▾ The features of our EPL Beam 250 dmx moving lights
▾ EPL Beam 250 installation and operation
▾ Advantages of the EPL Beam 250 dmx moving lights
▾ Safety precautions while using the EPL Beam 250 dmx moving lights
How EPL Beam 250 dmx moving lights will Save Your Function
Our Dmx moving lights will save your function when they bring in their special effects. These lights aim at improving your event experience while saving on power consumption. In most cases, when you need to cut off on the event expenses, you think of the perfect lighting solutions. Our moving head spot light comes to deliver the best user experience to you. We ensure that we produce this equipment specifically to bring profits to your business. As event organizers or a person with a special effect instrument’s interest, you will find our beam moving head light very essential.
These moving head spot lights serve an essential function for occasions like parties, weddings, carnivores, and sporting events. We ensured that these Led lighting devices come to make your entertainment events enjoyable and memorable. The devices prove flexible, easy for you to use, and affordable. In this way, you have the assurance of fantastic fun times.
The features of our EPL Beam 250 dmx moving lights
Our dmx moving lights come with unique modern lighting features, which will make it your first choice for your next event. Let’s explore the fantastic qualities you can enjoy with MOKA SFX moving head spot lights!
The device has intuitive touch enabling- with the recent upcoming smart devices, we have ensured that we don’t lag. You will enjoy touching and operating this moving head spot light. You will find it easy to play along with color codes to bring out the best experience. A TFT area that serves as the touch area will be on the left. By clicking the panel’s content with your figure, you get to operate in touch mode, completing the setting or helping you view the status.
You will also operate this moving head spot light through the assisted input features. These features, unlike the touch features, have to be touching disabled. The feature adds on the mode of operation for our Dmx moving lights.
Dmx enabled- our beam moving head light has Dmx functions that will allow you to play around with different color codes displayed by the EPL beam 250 device.
Display Panel for Language Selection
Language selective panel display- we made this beam moving head light in a two-language selection mode. You will have the liberty to operate this device in either the Chinese language or English. You will enjoy working in these two languages as more languages may be available in the future with growing technological advancements.
Changes in Commands Feature
We ensured that the beam moving head light allows you to alter and calibrate different commands in it. The different scene modes, working parameters, panel display settings, Dmx codes, and many more parameters in the device have easy user calibration steps. Our beam moving head light doesn’t operate or rigid commands that tie you to one choice. We skillfully designed this device to allow you flexible operational measures. You get a variety of options in the various services that this device will provide. If one method doesn’t suit your needs, you play around with other options until you get your perfect match.
Perfect Power Rating
A favorable power rating- what makes most led lighting devices highly advantageous has to do with the voltage and the frequency. If you choose the EPL Beam 250 device, you will have the freedom to operate it between 100 to 240 volts. The frequency rating goes from 50-60 Hz. With these ratings, you don’t work with the fear of power destruction through short-circuiting. Most power sources and electric sockets for lighting devices won’t allow electric power with voltages above the devices’ devices.
Lightweight and Easy Portability
Lightweight- most beam moving head lights receive permanent fixing due to the weights they bear. Our EPL Beam 250 dmx moving lights will allow you to term it portable due to its lightweight. If you work as a Dj and most of your instruments need to move as you move, then the DMX moving lights will serve you well. You may host a wedding, and that will require unique lighting for the different wedding moments. When the bride and groom make an emergence, special effect lighting will serve a great purpose. The after-party will also need this lighting experience. This occasion forms just an example where you will need to place these lights strategically. For that reason, you will need lightweight dmx moving lights that will prove easy to carry and put on different points. With a net weight of 19 kilograms, you will find our lighting device the perfect events equipment.
Numerous control modes are enabled- nothing will bore you like equipment with only one control mode. When this particular mode malfunctions, you may put a stop to a whole event. If the event relied on that equipment entirely, then a malfunction will mean a bad business. In this reliability regard, we made our moving head spot light with numerous controls. You will enjoy using the Dmx, Remote control, Sound, RDM, and self-walking controls.
The self-walking control will allow the color codes to change when a person walks below them. The motion sensors allow this, making the lights significantly extraordinary. The voice detectors will enable the sound control to change the light color with the change in music frequency. These two control modes form a unique feature that brings out the most memorable lighting experience when coupled with the other controls.
Stable Base and Positioning Feature
The dmx moving lights has a stable base that will hold the light in an upward or sideways position. The bottom has an expansive sitting area and two flexible arms that hold the light at the center. You will find it easy to use the beam moving head light either standing or on its sides in this position.
EPL Beam 250 installation and operation
When installing the DMX moving lights, you need to ensure you follow specific measures for excellent functioning. Consider the following steps for safe and reliable machine usage.
1. You may place the device in three positions only. You will need to have it installed horizontally, diagonally, or upside down. When putting it in an upside manner, always crosscheck the installation steps. This precaution also applies to the diagonal placement.
2. At all times, you should ensure the stability of the support frame, and the installation site comes first. If possible, you should use safety ropes and the device lift for maximum support to avoid falling off or sliding of the device.
3. Check regularly on the screw hooks and safety ropes to avoid accidents if they wear out.
4. Upon installing the dmx moving lights, charge them and power them on. You may now control the color codes using the channels provided. The different control modes will allow you to have a fantastic experience with the EPL Beam 250 dmx moving lights.
Now, the question comes, how to operate it? It is very easy to operate these moving head spot lights!
5. So, you have already Installed the product in an appropriate place.
6. Connect the beam moving head light to a power source.
7. Now, switch the device on, operate it through its multiple operating features.
8. Choose your preferred language through which you want to operate.
9. Check the color codes, use input features.
10. The best way is to use our auto mode features.
You have to understand many things about the product’s value, dmx address code, working mode, etc. So, the best way is to go through the beam moving head light user manual thoroughly before operating it.
Advantages of the EPL Beam 250 dmx moving lights
Every product has its advantages or disadvantages, which makes it an attraction for the buyers. And, these advantages influence the customers to buy and use it. So, what are the advantages of our beam moving head light which make it a welcome product for all your coming events!
You get to purchase from a renowned and sure brand- our company assures you of legit purchase where you can never be duped or tricked into buying a non-existed product. For years we have ensured that our products meet the standards that our clients need. We enjoy numerous international certifications giving you the buyer confidence to order and buy with us.
Warrantteed Beam Moving Head Light
You will get a one-year warranty on your product- for all our products. It will also apply when you purchase your EPL Beam 250. In this period, you will have the chance to get a replacement if your device malfunctions. We will conduct repairs for you for free too in this period. This warranty serves to build trust between you and our company.
Quality dmx moving lights
Our products meet the quality and durability status you need for your business- we understand that our biggest customers for these lighting equipment work in the entertainment sector. You will need these beam moving head lights to plan your wedding, carnivore, or sporting event.
With excellent lighting, things get more colorful and bubbly. If it’s a wedding, the bright lights will usher in your guests in style, lighting every moment magnificently. This moving head spot light will bring color into your functions, ensuring that your guests have a memorable time. The quality ensures that you get very classic and exclusive designed products. We provide that our products will give you a durable service since we use original materials that won’t wear out in a short duration. If you purchase our EPL Beam 250 dmx moving lights, be sure to have it with you for many years.
Enhance Reputation of Your Event
You will stand a chance to make beautiful moments. Beautiful moments have beautiful lightings. With these Dmx moving lights, you will light up all your special functions. The feeling that the unique lighting presents make your event the most adored. If the event takes place at night, then the more exciting they become. The darker it gets, the more colorful it will become. Having numerous control modes will allow you to gain maximum lighting experience and enjoy all the channels that our device offers. If you need to make your event spectacular, you will consider the EPL Beam 250 dmx moving lights.
Portable Entertaining Equipment
We pride ourselves on making portable entertainment equipment. When you purchase this product, you will enjoy a lightweight product. It is easy to install this moving head spot light at any place in no time due to its lightweight. If you get to move from one venue to another frequently, you will find it easy to carry up to several of our products. We ensured that the weight never exceeds 19 kilograms, and this will allow you to have up to five of them in a car and comfortably attend events from different locations.
Safety precautions while using the EPL Beam 250 dmx moving lights
- Always ensure you keep the product dry. On this note, avoid using it in humid environments. By doing this, you will prevent water droplets from percolating into the internal structures of the device. If found on the display panel, water and wet conditions may affect the quality of the light. The water may also cause short-circuiting since water conducts electricity. The electrocution that comes with water in electronic devices adds to why you need to keep this device dry.
- Ensure that the beam moving head lights get a firm installation any time you need to use them in the hanging position. Check the safety ropes regularly to avoid accidents. This safety measure will keep you and your audience safe as you enjoy the device’s lighting.
- Keep the moving head spot light well ventilated. Ventilation will take away the excess heat during the device operation. You will find out that the fans keep this device well cooled off. Consider cleaning the fan nets, lens, and the entire fan regularly. With regular fan cleaning, this product will keep its temperatures down, preventing malfunction or damages.
- Call for professional maintenance every time you need a fix or repair. This way, you will avoid electrocution risks that result from inexperienced maintenance practices.
- Avoid using the moving head spot light in varying electric voltages. The voltage should not vary by plus or minus ten units. Too much voltage will shorten the device lifespan, while low voltage alters the light bulb color.
- When power gets cut off, ensure there exists a 20-minute break before powering it on again. This timing lets the device cool off, completing and prevents overheating.
- Read the manual carefully to observe optimum usage. Whenever you need to clarify anything, consult your manual every time.
The world of entertainment has seen changes over the years. Moving head spot lights come in a time when technology pressures manufacturers to adapt to the changing environment. We designed this product to ensure that our customers get a modern yet satisfying product. In events like weddings, parties, and carnivores, these lights come in handy. They will help you as an event planner work and enjoy your functions. Seeing your clients happy and getting new referrals will become your new regular once you embrace using our Dmx moving lights.
We will provide you with other special-effect equipment to work hand in hand with our EPL Beam 250 dmx moving lights to give you an exclusive experience. The smog and smoke machines with our stage par lights will add to the event’s experience in a unique way. Feel free to purchase these from us too. When it comes to entertainment, we want to ensure that it becomes genuinely entertaining. Once you buy these moving head spotlights, follow the user manual’s steps to operate. The safety precautions will keep you and the devices safe, so don’t overlook even the simplest of them. We wish you a happy experience from our EPL Beam 250 and more purchases with us.