The EPL Aura led moving wash light

How to turn your party on with the EPL 810 moving head bar light

    ▾ What can the 810 moving head bar light do?
    ▾ What are the safety rules to keep in mind when using 810 moving head bar light
    ▾ How to set up the control and power system of the 810 moving head bar light?
    ▾ What about the DMX mode?
    ▾ How to set up the control and power system of the 810 moving head bar light?

There is always a time in life when you will be called upon to organize or plan an event. It could be your personal event or a corporate one; place of work, religious organization, non governmental or some other association. You will not want to flop things and you will want an interesting atmosphere, fully lit up. The funny thing is that, you should not make the time you were called to organize the party the same time you will start learning how to go about things in your parties. Therefore, it is important you learn how to do things now before it becomes a matter of urgency. Like the old proverb states that “you learn war in times of peace.” A lot of people freak out when they are in a planning committee or hem of affairs in the planning of events and parties. Their reasons for freaking out is understandable but not justifiable. Most people do not want any mishap to occur, especially such that people will say started from their end. However, if you follow through to the end of this article, you will not have such issues. Your deepest question about your next event and party would be answered during the course of the reading.

Going about an event is not a theoretical thing that you can really learn in school, you have to free yourself and let yourself out. What that means is that you need to pour yourself out into the event. Bring out the childish part of you. Release yourself to catch the most fun you can catch in the party. Leave out the stress of who or who will not get food during the planning process. Be sure to make catching fun and turning up your biggest priority. People have attended a couple of party where they forgot that foods were served because they enjoyed themselves to the fullest. You can always make such your experience in all of the events you organize or plan. Asides bringing in a good musician or a stand up comedian for your event, you must make sure there is something “seemingly “ natural in your party that can wow the guests on its own. Such would do a great work than brining in all the comedians in the world. This is because fun is meant to be an in-out experience.

In-out experience means it has to come from within. That is why even as the organizer, you must let out yourself into the event and let your guests catch the fun with utmost enjoyment and liveliness. Letting yourself out means you combine strong imagination with attention to details in order to make sure that you take care of every necessary angle that the party has. This seems to be a tedious or strenuous exercise but it isn’t in any way. You only need to set your head straight and everything will fall in place. You will need to see yourself in the party as part of the attendees who really wants to enjoy himself during the course of the event. Doing this will have a tremendous impact on your planning. Why such will happen is because you have shifted your thinking from planning a party for some set of people to planning it for yourself. You must see yourself as an audience who has come to turn up in the party. Seems somehow? Of course not! Just picture yourself or imagine yourself as one of the people who is attending the party and wants to enjoy himself.

All that has been said earlier has to do with the psychological aspect of the party, the next aspect is to work on the physical aspect of the party. How about you bring in a “scenery atmosphere”. It is possible you craft out a scene, like a wondrous island or a dreamy setting out of your party. It will make your party come a new. You may need the help of theatrical designers in order to make this happen. However, that should not discourage you because there is no big deal about crafting out a scenery effect. You only need to know what to do and that will go a long way to help you do what is right in your event and party. Like it was stated earlier, you only need to know what to do you need an information to propel you for action. As of now, you are mentally prepared for the party. To create a scenery effect for your party, you can get yourself a moving head light bar. Moving head light bars are intelligent lighting fixtures which are designed to have several other automatic and mechanical qualities and characteristics which are absent in the generic, ancient or traditional stage lighting systems.

Many people ask about what an “ordinary” rgb moving head light will do in their event. It is an interesting question. First thing is this, imagine yourself as a party attendee who is entering a party. As you are entering and seeing lights everywhere, right middle center, something is happening to your mind already. Of a truth, you will stand and appreciate the cinematic effect you are seeing in probably a birthday party or wedding party. That alone will keep you purring for more in the party. You can’t wait to see what next to expect in the party. The new breeds of rgb moving head offers several kinds of light, from spot light, to beam light, to wash light while some combine two or more kinds, they are called the hybrid. You will always get your money value for any of the kind of light you purchase. A moving led light bar brightens up the event and once everywhere is lit up with different colors at a perfect speed, you can be sure you already have a turned on atmosphere.

What can the 810 moving head bar light do?

The 810 moving head bar light is one of the best moving head light bars out there. The rgb moving head is out there to offer you a broad spectrum of benefits and gain. The moving led light bar’s benefits ranges from the overall turn around it will give your party to the cinematic effect which is sure to enraptured your guests. Of course you will not want to attend a party without life or anything of fun in it.

Power is life. It is the rate of the work. The moving led light and bar. The rgb moving head has a voltage of about 90v to 240v and operates with an alternating current at the frequency of 50/65 hertz. The rated power for this moving led light bar is 120W. Each pack of 810 moving head bar light comes with 10 watts high power with RGBW. Long last battery life almost half of DMX channel with 13. The moving led light bar has a strobe effect which ranges from about 1 to about 25 flashes per each second with several pulse effects. The 810 moving head bar light has both tilt and pan with 265 and 540 degree each. The are about 3 different methods of controlling the moving led light bar, the DMX 512, Master slave controlling system and the auto run method. The 810 moving head bar light features a preset controlling system which can be brought up with the use of the DMX 512 control pad. There are 8 in built programs present in the moving led light bar. The 810 moving head bar light weighs about 8 Kg and has a total size of 117 by 17 by 22 centimeters.

What are the safety rules to keep in mind when using 810 moving head bar light

One thing that must always be at the back of your mind when using rgb moving heads is that you got most of them in a perfect working condition and you must ensure it is operated safely. You must do well to follow through with the safety rules and guideline listed in the user’s manual. Do not switch the rgb moving head on immediately if it has been exposed to several rise and fall in temperature in this user manual. You must switch the moving led light bar off and remain like that till the temperature reaches room temperature. Another thing is that the electric connection must be well known. When operating the rgb moving head, you must ensure that the available volts is not more than what it should normally be. Always disconnect the rgb moving head from the main switch whenever you are not using it. The rise of smoke or any smell when you are starting up the 810 moving head bar light does not mean it is defective or faulty in any way. Be sure that the power cord of he rgb moving head is not spoilt nor crumpled by any sharp edge. If you will replace the cable or cord of the 810 moving head bar light, it must be done by a professional.

How to set up the control and power system of the 810 moving head bar light?

The moving led light bar features a typical connection which is made between the controlling system and the light. The connection must be done using two core screened cord. Each must have a minimum of 0.5mm diameter. Precautions must be taken so that the pins will not have contact with the metallic parts of the plug nor would they have contact with each other. The maximum number of light which you can connect together in parallel is 32. In order to achieve the master slave type of connection. You need to choose the lighting fixture that would serve as the master while you set the rest as slaves. The power connection for the moving led light bar is such that each of the light is supplied power individually through the use of external power source. Each rgb moving head can be connected to the power source using their power cable. Attention must be paid to the power consumption value of each moving led light bar when going about the connection. The power cable of the first lighting fixture can be connected to the power source directly then its power out cord can be subsequently connected to other light bars. If the voltage in use is at least 200 volts, you can only connect a maximum of 15 at a time.

What about the DMX mode?

The DMX terminator of the rgb moving head must be connected using a DMX terminal. It has to be done this way to avoid electrical noise from affecting or interfering with the controlling signals from DMX. The DMX terminal features an XLR connector with resistor of about 120 ohms.

How to prolong the lifespan of the 810 moving head bar light?

Although the lifespan of the rgb moving head is long and really lasts. There are several habits that can shorten the life of your moving head light bar while there are such that can prolong its usability. One thing that is important is the aspect of maintenance. First thing is that be sure not to use the moving led light bar in a harsh environment such as, wet, smoky or even dirty surrounding. This is because once the moving led light bar accumulates top much dirt on its casing the functionality will be affected. There must be routine cleaning to ensure optimum performance of the lighting fixture.