MK-C15 DMX CO2 Cannon
MK-C15 DMX co2 cannon is standard cryo jets in the special effects industry.
With DMX control on controller, easy angel adjustment, from 0-90 degree, truss clamp mounting steel plate, all these make MK-C15 DMX co2 cannon suitable for variety venue.
Nightclub installation, theme parks, concert, and festival application and other occasions.
With MK-C15 DMX co2 cannon nozzle, we use aluminum material, which has higher strength, the nozzle won’t break during the operation due to high pressure.
- 0-90 degree adjustable
- Spray 8-10 meters
- Without ice when spraying
- Use high electric solenoid valve
|0-90 degree adjustable
|AC110V / 220V, 60Hz / 50Hz
|27 x 20 x 39cm
|Packing Size (Carton):
|30 x 30 x 42cm
|Power Cord, DMX Cord, Gas Cord
|Normal Carton / Flycase (Separate Cost)
Here's all the little things you care about.
We have made a special design inside the tube, so when you use MK-C15 DMX co2 cannon, it won’t have ice coming out when it spraying.
So you don’t have to worry about audience complaints anymore.
MK-C15 DMX co2 cannon has a simple control panel, there has 2 control modes, DMX and power control.
As long as you press the button “ON”, the power control mode on set, MK-C15 DMX co2 cannon starts working after connecting with power. And push the button to “DMX”, it will switch to DMX mode.
Normally you can set the DMX address with 001, then use the signal cable connection, push the channel 1 on a lighting console, turn on and off with MK-C15 DMX co2 cannon.
While you need a notice that doesn’t keep MK-C15 DMX co2 cannon continuous spraying more than 10 seconds each time, in case of the valve gets damaged easily.
MK-C15 DMX co2 cannon use an electric solenoid valve, which is the top brand in the special effects field.
The maximum pressure capacity could reach to 1600 psi when you use a 40L co2 tank, the output pressure is 1000psi, the valve of MK-C15 DMX co2 cannon could bear it easily.
And with our high-pressure resin hose, which is built with steel wires inside, pressure capacity up to 300bar.
When you use MK-C15 DMX co2 cannon, the pipe would not leak after use several times.
When you use MK-C15 DMX co2 cannon, it’s better to pack with the Siphon CO2 tank, in case the output not enough.
Also volume 40L or 50lb carbon dioxide cylinder,1 tank connect with 1 MK-C15 DMX co2 cannon, it could last 70 seconds around.
If you use a smaller cylinder, then it will run out in a short time, not recommend.
You might want to use 1 tank to connect with 2 MK-C15 DMX co2 cannon, we do have T connection to do it, while not recommended.
Otherwise, the spray time shorter, and 2 co2 jets spray height may be different due to pressure.
At last, we highly recommend you to use this Co2 jet with our MK-E11 cold sparkler machine or other flame machines. I’m sure you that this kind of effect not only can give your performance or activity more wonderful, but also can give your audience a big surprise and shock!
MOKA SFX MK-C15 DMX co2 cannon, I highly recommend to take this model if you want to apply for all kinds shows, it will give you surprise definitely.
So, please don’t hesitate to contact the MOKA SFX sales team!
MOKA SFX CO2 Cannon Products needs to be used with a siphon-type CO2 storage tank, and cannot operate normally in a standard CO2 storage tank. Therefore, when purchasing, you must ensure that the supplier provides a siphon storage tank.
Generally speaking, both natural gas and welding suppliers will sell carbon dioxide at the same time. We recommend using as large a storage tank as possible. When the storage tank is larger, the number of sprays (the duration of continuous spraying) you can use CO2 Jet is more. Each pound of CO2 will support a spray time of approximately 1.5-2 seconds.
If you need support for obtaining carbon dioxide tanks, please feel free to contact us.
We support all the available way of Internation Shipping, as listed below:
1) By Express: FEDEX / DHL / UPS
2) By Plane + Delivery to Door
3) By Train + Delivery to Door
4) By Sea + Delivery to Door
Some of the above shipping methods we can do DDP, so you can avoid the handling of tax and save cost.
As the Unit charge for the different countries is different, pls contact us to check the exact freight offer.
1) For entire product is a 1-year Warranty.
2) After 1-year, the component cost will be charged when replacement needed.
Lots of SFX items made by China manufacturer are lack of the critical point: “Details”. But you will find an elegance arrangement product line in us, as we believe that only details will speak out for our difference to the others.
MOKA SFX MK-C15 DMX CO2 Cannon – The Stage Equipment You Need For Unforgettable Memories
▾ The MOKA SFX MK-C15 DMX CO2 Cannon: Features and Advantages
▾ The MOKA SFX MK-C15 DMX CO2 Cannon- Tips To Install
▾ Safety Precautions
▾ Benefits and Applications of the MOKA SFX MK-C15 DMX CO2 Cannon
Millions of people are attracted to large-scale events like concerts, balls, reality shows, weddings, celebrity meet, and greets, seminars, etc. So, is it just the stars or the music that makes these events unforgettable? Well, the larger credit for the success of these events goes to the top-quality visual and sound effects.
Event organizers swear by high-quality stage equipment to add special effects to events. Across an array of events, the DMX CO2 cannon is one of the most frequently used equipment for adding a mystical effect to stage performances as well as other venues.
The CO2 blaster releases a burst of theatrical smoke into the air upon activation. It creates a beautiful, misty effect that transforms the vibe of the event from ordinary to beyond extraordinary. If you add additional effects like flame, glitter, or confetti to this cryo jet cannon, you can also create mind-boggling special effects on stage. Just imagine having it for the event that you organize? Try this machine out today!
At MOKA SFX, we produce equipment suited for a range of events. Our convenient, easy to assemble, and high-quality CO2 blasters are powered by cryo technology that ensures special effects with a promise of safety.
So, whether it’s a product launch, a wedding, or the Coachella itself, this CO2 blaster is made to bedazzle your audience. Featuring a steady valve, DMX controller, and convenient angle adjustment, this cryo jet cannon is the ultimate stage equipment for a variety of events.
Read our detailed product guide to know about all the advantages, features, applications, precautions, and installation tips of the MOKA SFX MK-C15 DMX CO2 Cannon.
The MOKA SFX MK-C15 DMX CO2 Cannon: Features and Advantages
The MOKA SFX MK-C15 DMX C02 cannon is complete with effective cryo technology and high-quality parts to make your event a grand success.
Dive in to find out more about the fantastic features of this cryo cannon:
High flexibility through adjustable angles
Do you want more control over the direction in which you release smoke effects? Well, the MK-C15 DMX CO2 cannon is the ideal solution for you. It lets you maneuver the device with ease owing to its adjustable angles.
You can simply adjust the movement between 0 and 90 degrees to cover spaces with additional flexibility. This cryo jet cannon allows you to ensure systematic coverage of the venue, given the adjustable angles.
Furthermore, these adjustable barrels are powered by a stable valve that effectively spreads the smoke, occupying large areas of the stage. Our products are popular across the world for the convenience we bring to your events. All you need is our CO2 blaster to add superior special effects to your events with ease.
Whether it is a small, personalized event or a large-scale concert, the wide-coverage ability of MOKA SFX cannons never disappoints.
Far-reaching smoke height for top-quality effects
When you have stage performances in the night, large-scale music festivals like the Tomorrowland, or other festivities, the smoke height is a crucial factor that can make or break the purpose of adding special effects to the event.
The MK-C15 DMX CO2 cannon comes to your rescue when you want far-reaching smoke to impress your audience. This cryo jet cannon can effectively release smoke up to heights between 8 and 10 meters. This is impressive for varied events and venues since it creates a thick cloud of smoke.
With this cryo jet cannon, your stage shows and events are sure to have an element of fun and excitement.
Easy control modes for added convenience
Control is key when it comes to organizing events. As event managers and organizers, your priority is to ensure that your special effects are dispersed at the right time and in the right amount.
The MK-C15 DMX CO2 blaster has two easy and convenient modes that offer you superior device control. These modes are visible on the control panel. These are the DMX control and power control modes that let you maneuver the operation of the cryo jet cannon.
You can easily activate this machine by pressing the ‘On’ button. Then, you can go on to select your desired control mode. Thus, you have all the control you wanted with our convenient cryo cannon.
Stage equipment requires a steady valve to operate efficiently. If power management is insufficient, the equipment may undergo fluctuations leading to permanent damage. Moreover, power usage has many risks associated with it.
To avoid unwanted risks, we equip our machines with top quality parts. That being said, the MOKA SFX MK-C15 DMX CO2 cannon features a top-notch valve that ensures safety during use. This is an electric solenoid valve that is one of the most preferred materials in the market.
This valve powers the machine to reach the maximum pressure capacity of 1600 psi while using a 40L carbon dioxide tank. It also has an output pressure of 1000 psi, making the device stable yet ultra-powerful.
High-pressure resin hose
The MOKA SFX MK-C15 DMX CO2 cannon features a high-pressure resin hose built with sturdy steel wires. This hose powers the cryo jet cannon to produce a pressure capacity of up to 300 bar. This high-pressure hose ensures powerful smoke dispersal continuously throughout the event.
Despite rigorous wear and tear, this hose does not leak or burst due to pressure. Instead, it stabilizes the flow of smoke so that you can conduct hassle-free events. We recommend using high-quality CO2 tanks along with our CO2 blaster to ensure the best results.
Organizing a special event, set all your worries aside with our efficient smoke cannons!
No harmful substances
A CO2 blaster is an ideal machine to liven up shows and events. However, poor quality smoke jets can harm your audience with low temperature ice. Thus, we make machines that are not just reliable and efficient but also safe for exposure.
Many smoke cannons in the market release ice-based smoke that causes skin irritation and visibility issues with prolonged exposure. However, our machines do nothing of the sort. We use cutting-edge cryo technology to disperse ice-free smoke that creates dense smoke clouds without any harmful effects.
The MK-C15 DMX CO2 cannon is thus completely safe and does not cause any ill-effects or harm to your skin, eyesight, or lungs.
Robust, durable, and portable design
Have you noticed bulky, space-consuming stage equipment at events? Well, we put an end to all your portability troubles with our CO2 cannons. Our designs are robust, yet portable, and durable.
The MK-C15 DMX CO2 cannon weighs just 9 kilograms, which makes it suitable to be kept in cars, mini-trucks, vans, etc. Our compact and ergonomic designs allow you to travel with these machines with ease and comfort.
Moreover, our top-quality parts ensure a robust build that can withstand diverse weather conditions and remain durable. So, your wait for the ultimate stage equipment is finally over!
The MK-C15 DMX CO2 Cannon features quick and effective connectors that allow you to attach CO2 tanks with ease. If you attach a 50 L tank, the smoke effects using our DMX controller last over 70 seconds easily.
All you need to do is keep a few backup cylinders in case the event is of a longer duration. Once one cylinder gets used, you can quickly and securely connect the other one to the CO2 blaster.
Thus, you have convenience, safety, and efficiency, all packed in one powerful and sturdy machine.
The MOKA SFX MK-C15 DMX CO2 Cannon- Tips To Install
The MK-C15 DMX CO2 cannon is your one-stop solution to create amazing smoke effects at all kinds of events. Moreover, it offers an easy and quick installation. Here are the simple steps in which you can effectively operate this cryo jet cannon.
- We recommend referring to the manual for extra assistance while installing the machine. The manual is complete with images that define steps with utmost clarity.
- The first step for installing the CO2 blaster is to decide the area of installation. Following this, you must ensure that you have the carbon dioxide cylinders kept near the cylinder.
- Now, you must connect the CO2 cylinder to the cryo jet cannon. This step must be completed with caution.
- Check if the attachments are made properly. Then, connect the cylinder and the hose. The hose is available along with this CO2 Cannon.
- Once the previous step is complete, you may move on to attach the hose to the CO2 blaster.
- Finally, you will see two control modes on the MK-C15 DMX CO2 Cannon. Switch the machine on, select your mode, and unleash the magical effects into the crowd!
At MOKA SFX, your safety is our utmost priority. We manufacture products that are certified by the FCC, CE, as well as the RoHS making them absolutely safe for use. However, there are some necessary safety precautions that we recommend you keep in mind while using this CO2 blaster.
Here are the precautions that you must take to ensure secure operations of the MK-C15 DMX CO2 cannon:
- Always set up the CO2 blaster at a distance of more than 5 feet from people.
- Ensure that people operating the cryo jet cannon are well-versed with its usage techniques.
- Never point the CO2 Cannon in the direction of someone’s face. Prolonged exposure may cause visibility issues and asphyxiation.
- Always use CO2 jet machines in ventilated venues. Lack of air circulation will obstruct the nozzle, thus affecting the results. Adequate air circulation is important to avoid visibility or breathing troubles as well as to create a thick smoke that diffuses quickly.
- If anyone is under the influence of alcohol or drugs, please ensure that they are kept away from the CO2 blaster.
- Always place the CO2 Cannon on flat ground while operating it.
Benefits and Applications of the MOKA SFX MK-C15 DMX CO2 Cannon
The MOKA SFX MK-C15 DMX CO2 Cannon is a high-quality, versatile machine. It is for several occasions and uses. Some of the best applications of this cryo jet cannon are:
Get the party started on the dance floor
As the crowd takes over the dance floor, watch the MK-C15 DMX CO2 Cannon create magic while it simultaneously cools the floor. The mystical smoke effects by the CO2 blaster accompanied by the booming music are enough to send the crowd into a frenzy.
Watch concerts, and stage performances come alive!
Have you ever been to the Sunburn Festival? Well, if you have, you’d know the unforgettable effect that the light, smoke, and confetti bring to the live performances as well as the overall atmosphere. With the MK-C15 DMX CO2 Cannon, you can add an oomph to any concert or stage show.
Get creative with CO2 cannons and mesmerize the audience.
If you thought that CO2 cannons could only produce smoke effects, we have a surprise in store for you. The MK-C15 DMX CO2 Cannon can be used with a sparkler, confetti, and smoke machines to add a fun-filled, vibrant, and exciting vibe to events. Be it a wedding or simply an evening soiree, with the MOKA SFX CO2 Cannons, the fun never ends!
Dazzle the crowd with the best CO2 Cannon!
If you’re an event manager or show organizer, you are already aware of the importance that high-quality stage equipment holds. For wide-ranging venues, stage and audience sizes, weather conditions, etc., you need equipment that is robust, reliable, safe, portable, and of the highest quality.
Furthermore, the proper stage equipment can bring life to your events by adding fun effects for the audience to enjoy. The MOKA SFX MK-C15 DMX CO2 blaster is the solution to all your special effects needs! It is complete with top-notch features along with a compact build and powerful valve that can make any event a success.
If you’re looking for the ultimate control and convenience in making your events memorable, the MOKA SFX MK-C15 DMX CO2 Cannon is the ideal stage equipment for you. Combined with our confetti, flame, and sparkler machines, you can create magic on stages like never before.