1 * 1 pixel picture

MK-B16 BubbleMist Pro

The MK-B16 BubbleMist Pro is a 4-nozzle smoke bubble machine, which has an IPX4 rain-resistant plastic housing, an internal IP55 fan and water-guiding structure for light outdoor rain use. It supports three effect modes: smoke bubble, bubble, and fog, making it suitable for weddings, stages, parties, outdoor shows and other atmosphere-building scenes. With four-nozzle output, it can quickly produce a large volume of bubbles which can reach a maximum of 10m. In smoke bubble mode, the bubbles are fuller, float higher, and are less likely to burst in light rain. The machine supports DMX/RDM control for more reliable use in professional event setups.

  • Create dense, high-floating smoke bubbles with up to 10 m lift.
  • Choose from three effect modes: smoke bubble, bubble, and fog.
  • IPX4 rain-resistant housing,IP55 fans inside with a water-guiding structure supports outdoor use in light rain.
  • Adjustable lower fan speed helps control bubble size and floating behavior.
  • 7 L bubble fluid tank and 3 L fog fluid tank support longer event operation.
  • Supports on-board panel control, DMX 3-pin/5-pin, and RDM for professional control setups.

Specifications

Voltage100 ~ 120 V  60 Hz / 200 ~ 240 V  50 Hz
Max Power1600 WPreheating Time220 V: About 3.5 MINS

110 V: About 4.5 MINS

Control/td>DMX512 (with 3pin/ 5pin port)

/ LCD Panel

/ Remote Control

DMX Channel4 CH
Fog Oil Capacity3 LFog Fuel Consumption1.8 L/H
Bubble Fluid Capacity7 LBubble Fuel Consumption2.4 L/H
N.W.33 KG
Product Size (L*W*H)50*45.5*57 cm
ConsumablesSmoke oil, Bubble Fluid
Effect ModeBubble Mode, Fog Mode, Smoke Bubble Mode
  • Send Your Inquiry

Down to the smallest detail.

Explore the product description below. For any further inquiries, visit our FAQ page or contact us directly.

Description

The MK-B16 BubbleMist Pro is a professional four-nozzle smoke bubble machine designed for events that need rich atmosphere, flexible effects, and dependable outdoor performance. It combines a fog system and a bubble system in one unit, allowing users to switch between smoke bubble, bubble, and fog modes for weddings, stage shows, parties, scenic spots, outdoor performances, and rental applications.

In smoke bubble mode, fog is guided from the smoke chamber through internal piping to the bubble film, creating full, eye-catching bubbles with a stronger floating effect. The four-pump bubble system and four-in-one bubble pipeline help deliver stable fluid flow to each output, producing dense bubbles in a short time. With bubble effects reaching up to 10 m, the MK-B16 makes the atmosphere visible across wider venues and open-air spaces.

The machine is built with practical event use in mind. Its IPX4 rain-resistant housing and water-guiding structure support operation in light rain, while protected internal components help improve reliability in demanding environments. The 1500 W heating element reaches working temperature in about 3.5 minutes in 220 V power, and the fog system includes low-fluid protection to help protect the machine when fog fluid runs out. A built-in tank light also makes fluid levels easier to check in dark venues, backstage areas, and night events.

For longer shows, the large bubble and fog fluid tanks help reduce refilling interruptions, while the bubble fluid return system guides unused fluid back into the tank for cleaner operation and less waste. Three lower fans help adjust bubble size and floating behavior, giving operators more control over the final visual effect. This makes the effect easier to match to different venue sizes, weather conditions, and show rhythms. With on-board panel control for manual, timed, and fixed-output operation, plus DMX and RDM support, the MK-B16 fits both simple standalone setups and professional stage control systems.

Feature

Three Effect Modes:

  • Bubble Mode: Produces clean bubble effects for parties, weddings, and family-friendly event scenes.
  • Smoke Bubble Mode: Wraps fog inside each bubble for a fuller, more dramatic visual effect.
  • Fog Mode: Produces fog only, allowing the machine to support more stage and atmosphere applications.

The four-nozzle output structure helps create a large number of bubbles in a short time, up to 10 m, making the effect more visible across wider event areas. Four bubble pumps provide stable fluid delivery, while the protected motor design helps reduce damage caused by bubble fluid exposure. Three lower fans help control how bubbles form and float. By adjusting the lower fan speed, users can influence bubble size and floating behavior, making it easier to adapt the effect to different venues and event needs.

The 7 L bubble fluid tank and 3 L fog fluid tank support longer operating time during events, helping reduce interruptions caused by frequent refilling. The 1500 W heating element helps fog fluid turn into fog quickly. The low-fluid protection function stops operation when the fog fluid is used up, helping protect the machine and support more reliable long-term use.

The IPX4 rain-resistant housing and water-guiding structure support outdoor use in light rain. A built-in tank light makes it easier to check fluid levels in dark venues, backstage areas, or night events. Unused bubble fluid near the output area can be guided back into the tank, helping reduce fluid waste and keeping operation cleaner during longer events.

The MK-B16 supports on-board panel control, DMX 3-pin/5-pin, and RDM. It can be used manually for simple setups or connected to a professional control console for stage shows, outdoor events, and rental applications.

  • No smoking near the machine.
  • After use, the floor might be wet; clean to avoid slipping.
  • Use proper bubble and fog oils to avoid clogging bubble nozzles.
  • Don’t add perfumes or other substances to the liquid!

We support all the available way of Internation Shipping, as listed below:

1) By Express: FEDEX / DHL / UPS
2) By Plane + Delivery to Door
3) By Train + Delivery to Door
4) By Sea + Delivery to Door

Some of the above shipping methods we can do DDP, so you can avoid the handling of tax and save cost.

As the Unit charge for the different countries is different, pls contact us to check the exact freight offer.

1) For entire product is a 1-year Warranty.
2) After 1-year, the component cost will be charged when replacement needed.

Helped 1000+ Customers Since 2013

Lots of SFX items made by China manufacturer are lack of the critical point: “Details”. But you will find an elegance arrangement product line in us, as we believe that only details will speak out for our difference to the others.

You May Also Like

MK-B12A smoke bubbler

LED 4-Way Smoke Bubble Machine

MK-B17 LED Locust Bubble Machine

LED 90W Locust Bubble Machine

LED Storm Bubble Machine
LED Storm Bubble Machine
MK-B13A LED 2-Way Smoke Bubble Machine

LED 2-Way Smoke Bubble Machine

Update cookies preferences
Scroll to Top